LT3474/LT3474-1
APPLICATIONS INFORMATION
To minimize the error from variations in V ADJ pin current,
use resistors with a parallel resistance of less than 4k. Use
resistors with a series resistance of 5.11k or greater so as
not to exceed the 250μA current limit on the REF pin.
Dimming Control
There are several different types of dimming control cir-
cuits. One dimming control circuit (Figure 6) changes the
voltage on the V ADJ pin by tying a low on-resistance FET to
the resistor divider string. This allows the selection of two
different LED currents. For reliable operation, program an
LED current of no less than 35mA. The maximum current
the C-RC string (tied to the V C pin) shown in Figure 7 for
proper operation during start-up. When the PWM pin goes
high again, the LED current returns rapidly to its previous
on state since the compensation and output capacitors are
at the correct voltage. This fast settling time allows The
LT3474 to maintain diode current regulation with PWM
pulse widths as short as 40μs. If the NFET is omitted and
the cathode of the LED is instead tied to GND, use PWM
pulse widths of 1ms or greater. The maximmum PWM
dimming ratio (PWM RATIO ) can be calculated from the
maximum PWM period (t MAX ) and minimum PWM pulse
width (t MIN ) as follows:
dimming ratio (I RATIO ) can be calculated from the maxi-
mum LED current (I MAX ) and the minimum LED current
(I MIN ) as follows:
t MAX
t MIN
= PWM RATIO
I MAX
I MIN
= I RATIO
Total dimming ratio (DIM RATIO ) is the product of the PWM
dimming ratio and the current dimming ratio.
I RATIO = = 10:1
Anotherdimmingcontrolcircuit(Figure7)usesthePWM
pin and an external NFET tied to the cathode of the LED.
When the PWM signal goes low, the NFET turns off, turn-
Example: I MAX = 1A, I MIN = 0.1A, t MAX = 12ms, t MIN = 40μs
1A
0.1A
ing off the LED and leaving the output capacitor charged.
The PWM pin is pulled low as well, which disconnects the
PWM RATIO =
12ms
40 μ s
= 300:1
V C pin, storing the voltage in the capacitor tied there. Use
REF
DIM RATIO = 10 ? 300 = 3000:1
R1
LT3474
PWM
R2
V ADJ
GND
60Hz TO
10kHz
PWM
LT3474
DIM
3474 F05
LED
GND
3.3nF
10k
0.1μF
3474 F06
Figure 6. Dimming with an NFET and Resistor Divider
Figure 7. Dimming Using PWM Signal
3474fd
16
相关PDF资料
LT3475EFE-1#PBF IC LED DRVR HP CONS CURR 20TSSOP
LT3476EUHF#PBF IC LED DRVR HP CONST CURR 38-QFN
LT3477EFE#PBF IC LED DRVR HP CONS CURR 20TSSOP
LT3478IFE#PBF IC LED DRVR HP CONS CURR 16TSSOP
LT3486EFE#PBF IC LED DRVR WHITE BCKLGT 16TSSOP
LT3491EDC#TRMPBF IC LED DRIVER WHITE BCKLGT 6-DFN
LT3492IFE#TRPBF IC LED DVR HP CONST CURR 28TSSOP
LT3496IUFD#PBF IC LED DRVR WHT/RGB BCKLT 28-QFN
相关代理商/技术参数
LT3474IFE#TRPBF 功能描述:IC LED DRVR HP CONS CURR 16TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极,PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LT3474IFE-1 制造商:LINER 制造商全称:Linear Technology 功能描述:True Color PWM Delivers Constant Color with 400:1 Dimming Range
LT3474IFE-1#PBF 功能描述:IC LED DRVR HP CONS CURR 16TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极,PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LT3474IFE-1#TRPBF 功能描述:IC LED DRVR HP CONS CURR 16TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极,PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LT3474IFE-1-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:Step-Down 1A LED Driver
LT3474IFE-1-TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:Step-Down 1A LED Driver
LT3474IFE-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:Step-Down 1A LED Driver
LT3474IFE-TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:Step-Down 1A LED Driver